Examples of applications in hand tools industry are de-rusting and de-scaling products with tradesman’s tools, smoothing and polishing surfaces after welding or before treatment and many more. If you need help solving your problem, please contact our sales team.
Are you looking for the right brush for your application?
Obtuz disc brushes can be supplied with various fill configurations. For example with compressed face, with narrow or large fill collars, with fill array in particular forms, either with normal vertical bristle bundles or with inclined bundles to all directions.
Obtuz has a large range of moulded brush discs. These are used for various applications, namely, de-burring. For this, brush discs with nylon abrasive filling or wire are mainly used. The abrasive filling removes burrs that occur during production processes.
Back in 1931 the history of an inimitable brush began: Obtuz was already the patentee for this spiral brush with a double-sheet backing tape.
Our roller brush coil designed as welded package system will also pack the tiger in your tank! Why is it reasonable and advantageous to purchase a welded package system type 231?
A further variation of the “Throw-Away” system is type 230. It consists of continuously wound DBS-spiral brushes fitted to a thin walled steel, stainless steel or non-ferrous metal tubular shaft.
The long period of development of this brush type has left its mark and appears in every detail of the brush. The STS-spiral coil is the only brush type that can be produced with very small diameters.
A very interesting aspect of our STS-spiral coils is the type with inverted fill material that is used, for instance, for polishing, descaling or removal of corrosion off rods or wires in a continuous operation.With an outside diameter of only 20 mm it is possible to reach an inner diameter of zero.
Interior brushes are suitable for drilling machines, flexible cables and machining centers and are reliable tools for the deburring of O-ring grooves and bores. Furthermore they are used for cleaning, smoothing and derusting purposes.
Cup brushes with or without shaft are allround brushes used in angle grinders and machining centers for removal of varnish layers, scales and corrosion; also ideal for the treatment of welds and paling-board cleaning.
End brushes are normally used in electrical- and pneumatic tools, i. e. in the car body and motor construction and all fields of car repair and maintenance.
Bevel brushes are a great mixture of cup- and circular brushes which were developed by us especially to work edges and corners in hardly accessible operation areas.
The whole energy of the treatment on a few milimeters. Single-section brushes from Obtuz are ideal for that. Being narrow, aggressive, robust and most versatile, small work pieces can exactly be treated and profiled surfaces be cleaned, derusted and matted.
