Achieve Ready to Ship Parts, without fail

Email Support

INFO@OBTUZ.BIZ

Call Support

+91 9971453181

Cleaning

Brushing Solution for Cleaning

Examples are removing dirt, dust and rest material from products or surfaces. Cleaning can be done in almost any market.

Are you looking for the right brush for your application?

Belt Brushes

We can produce flat-belt brushes in any length requested, open ended or endless. They are mainly equipped with natural hairs or bristles, plant fibres or synthetic bristles.

For this brush type we use standardised vee-belt profiles, made of polyester elastomers and immune to moisture, oil and grease as well as resistant to numerous chemicals. Therefore an application is possible in a temperature range from -15°C to +80°C.

Toothed belt brushes from Obtuz are a version of common belt brushes and therefore are appropriate for the same application purposes. However, they offer one advantage in the feeding technique which the others do not: they can be set to a measurable cycle time.

Circular and Roller Brushes

Circular brushes are defined as brushes with a body length of up to 100 mm. The comprehensive range of dimensions, core materials, fill materials and fill configurations demonstrate the versability of Obtuz again and again.

Roller brushes Type 421 without a sub-body are defined as having a body length longer than 100 mm (for brushes shorter than 100 mm, see “Circular brushes”). The comprehensive range of dimensions, core materials, fill materials and fill configurations demonstrate the versability of Obtuz again and again.

We can produce flat-belt brushes in any length requested, open ended or endless. They are mainly equipped with natural hairs or bristles, plant fibres or synthetic bristles.

ST-System

The brush cores are made of special reinforced polypropylene making them light, resistant to acids and alkalis and suitable for use in the food industry. The range of dimensions is extensive. 

The ST-system above all is suitable for roller brushes fitted to a shaft or tubular core with journals made of steel or stainless steel (1.4301; 1.4541).

Strip and Sealing Brushes

The bristles of strip brushes are fitted in a metal backing tape. This allows the brushes to be mounted by means of holders or inserted into grooves. For example, as replacements for special circular and roller brushes.

Our special types consist of 10 types of strip brushes with metal backing widths from 1,8 mm to 13,5 mm, which we can produce in a large range of variations.

Our sealing brushes are available in many forms and with a wide variety of profiles. These profiles can also be used as mounting flanges, for example in a self-adhesive design, or fixed by screws or by welding.

Our sealing brushes are available in many forms and with a wide variety of profiles. These profiles can also be used as mounting flanges. The special types consist of 11 types of sealing brushes which we can produce in a large range of variations on your request.

These types of brushes are particularly versatile in the way in which they can be mounted and in which they harmonise visually.

In addition to the versatility of 11 particular types of aluminium profiles they can be supplied anodized resp. plastic coated in RAL colours on your request.

Our special types of sealing brushes consist of 16 particular plastic profiles which we can supply in a comprehensive range of variations.

Obtuz strip brushes with metal backing tape have a big advantage over other brush constructions with rigid plastic bodies. This is because they can be formed to ring brushes with a diameter of 12 mm and with a bore of 5 mm up to the biggest diameter of 2.000 mm with an inward diameter of 1.000 mm.

As you are able to receive the strip brush with the fill facing outwards, it is no problem for Obtuz to produce the same brushes with the fill facing inwards. Even with these brushes you have a dimensional range that cannot be reached with any other brush construction.

The strip brushes in cup form are also an all-purpose brush type.

Our sealing brushes with steel profile can also be formed like the strip brushes. The dimensions range from a diameter of 40 mm to the diameter of 1000 mm and therefore cover a wide spectrum of applications.

Disc Brushes

Obtuz disc brushes can be supplied with various fill configurations. For example with compressed face, with narrow or large fill collars, with fill array in particular forms, either with normal vertical bristle bundles or with inclined bundles to all directions.

Obtuz has a large range of moulded brush discs. These are used for various applications, namely, de-burring. For this, brush discs with nylon abrasive filling or wire are mainly used. The abrasive filling removes burrs that occur during production processes.

Roller Brushes with Metal Backing Tape

Back in 1931 the history of an inimitable brush began: Obtuz was already the patentee for this spiral brush with a double-sheet backing tape.

The DBS-Spiral roller brushes types 220 & 221 are extremely flexible in their dimension and depending on the required performance these endless spiral brush coils are mounted on core systems made of mild steel, stainless steel or non-ferrous metal.

Our roller brush coil designed as welded package system will also pack the tiger in your tank! Why is it reasonable and advantageous to purchase a welded package system type 231?

A further variation of the “Throw-Away” system is type 230. It consists of continuously wound DBS-spiral brushes fitted to a thin walled steel, stainless steel or non-ferrous metal tubular shaft.

The long period of development of this brush type has left its mark and appears in every detail of the brush. The STS-spiral coil is the only brush type that can be produced with very small diameters.

A very interesting aspect of our STS-spiral coils is the type with inverted fill material that is used, for instance, for polishing, descaling or removal of corrosion off rods or wires in a continuous operation.With an outside diameter of only 20 mm it is possible to reach an inner diameter of zero.

The STS-spiral roller brush range contains all measurements from small to extra large and this unbeatable selection of diameters makes this brush a totally reliable tool for light brushing tasks.

The Obtuz roller brush type 350 is one of our “highlights” as it consists of a lightweight aluminium core with horizontal grooves where strip brushes are fitted in.

Type 964 is made of single section brushes mounted together on a core up to the required face width. This roller brush type can be mounted on cores made from stainless steel, plastic coated steel or mild steel.

Type 964 is made of single section brushes mounted together on a core up to the required face width. This roller brush type can be mounted on cores made from stainless steel, plastic coated steel or mild steel.

Interior, Tube Cleaning Brushes

Interior brushes are suitable for drilling machines, flexible cables and machining centers and are reliable tools for the deburring of O-ring grooves and bores. Furthermore they are used for cleaning, smoothing and derusting purposes.

For hand use with extension rods or power driven flexible shaft and bench machines. Tube cleaning brushes are suitable for drilling machines, flexible cables and machining centers. They are reliable tools used for tube cleaning and the removal of rust and scales.

End and Cup Brushes

Cup brushes with or without shaft are allround brushes used in angle grinders and machining centers for removal of varnish layers, scales and corrosion; also ideal for the treatment of welds and paling-board cleaning.

End brushes are normally used in electrical- and pneumatic tools, i. e. in the car body and motor construction and all fields of car repair and maintenance.

Circular, Single-Section and Pipeline Brushes

The RECORD with crimped wire fill is suitable for deburring, cleaning, smoothing, polishing, dulling, paint stripping and roughing. The twist-knotted ULTRA for treatment of welding seams, descaling and removal of varnish.

The whole energy of the treatment on a few milimeters. Single-section brushes from Obtuz are ideal for that. Being narrow, aggressive, robust and most versatile, small work pieces can exactly be treated and profiled surfaces be cleaned, derusted and matted.

Pipeline brushes are “most wanted” for welding preparations on oil-, gas- and water pipelines in construction. We especially produce single section pipeline brushes for operations at the fillet welds and roots of seams. If the wires are embedded in an elastic synthetic material they are extremely aggressive and durable.